Share this guide
Help more farmers discover useful tools
Save Time
Instant access
More Benefits
Apply for schemes
Better Decisions
Real-time data
Transparent & Safe
Official platforms
How to Install and Maintain a Drip Irrigation System: Complete Technical Guide
Flood irrigation is notoriously inefficient: over 60% of applied water is lost to surface evaporation, runoff, and deep subsoil percolation below the root zone. In contrast, micro-irrigation (Drip Irrigation) delivers precise drops of water and dissolved nutrients directly to the plant's active root zone, saving 50% to 70% water while boosting crop yields by 25% to 40%. However, hundreds of farmers suffer premature system failure within 2 years due to mineral scaling, emitter clogging, and improper filtration. This comprehensive engineering guide covers system layout, component sizing, routine acid maintenance, and government subsidy applications.
1. Anatomy of an Industrial-Grade Drip Irrigation System
A high-performance drip installation comprises five interconnected engineered units:
──> Pump
──> Non-Return Valve
──> Primary Sand/Hydrocyclone Filter
──> Venturi Fertigation Unit
──> Secondary Screen/Disc Filter (120 Mesh)
──> Main PVC Line (63/75/90 mm)
──> Sub-Main Line with Control Ball Valves
──> Lateral Poly Tubes (12/16 mm) with Inline/Online Drippers
──> End Flush Caps
Core Components & Selection Rules: 1. Hydrocyclone Sand Separator: Essential if water is drawn from deep tubewells pumping heavy centrifugal sand and grit. 2. Media Gravel / Sand Filter: Mandatory for open farm ponds, canals, or rivers containing suspended organic algae and plant debris. 3. Secondary Disc Filter (120 Mesh / 130 Micron): Grooved plastic discs tightly compressed together capture fine silt and mineral flakes before water enters laterals. 4. Venturi Injector Assembly (1" to 2"): Utilizes differential pressure (Bernoulli's principle) to suck dissolved fertilizer stock solution directly into the irrigation stream. 5. Dripper Lateral Lines:
- Inline Emitters (Drip Tape / Integral Dripline): Factory-molded pressure-compensating (PC) emitters sealed inside the pipe at fixed intervals (30 cm, 40 cm, 50 cm; discharge 2 LPH or 4 LPH). Best for closely spaced row crops (vegetables, cotton, sugarcane).
- Online Emitters (Button Drippers): Laterals punched manually with individual drippers (4, 8, or 16 LPH). Best for spaced orchard trees (mango, pomegranate, citrus, coconut).
2. Sizing Calculations for 1 Acre
- Plant Population & Emitters: Suppose you have 4,000 vegetable plants in 1 acre with one 2 LPH dripper per plant = Total Flow Requirement: 8,000 Liters/Hour (8.0 m³/hr). * Operating Pressure: Optimum emitter pressure is 1.0 to 1.5 kg/cm² (14 to 21 PSI). * Main Line Sizing: For flows up to 10 m³/hr, a 63 mm (2.5 inch) Class-2 PVC pipe maintains water velocity below 1.5 m/s, preventing damaging pressure surges (water hammer).
3. Preventing & Clearing Clogged Emitters (Acid & Chlorine Flushing)
Hard groundwater containing dissolved Calcium Carbonate, Magnesium, and Iron precipitates inside tiny emitter labyrinths, reducing water discharge:
Protocol 1: Hydrochloric Acid (HCl) Treatment (For Mineral Scaling) * Conduct once every 45 to 60 days if using hard borewell water. * Use commercial grade Hydrochloric Acid (Muriatic Acid 33%). * Calculate acid quantity to lower water pH at the lateral end to 4.0 (tested with pH litmus paper). * Inject the acidified water into the system until laterals are filled, immediately shut off the pump, and let it stand inside the pipes for 24 hours to dissolve mineral encrustations. * Open all lateral end caps next morning and flush thoroughly with clean water for 10 minutes at high pressure.
Protocol 2: Bleaching Powder / Chlorine Treatment (For Algae & Biological Slime) * Dissolve Calcium Hypochlorite (Bleaching Powder) @ 20 ppm free chlorine. * Inject into the system, leave for 4 hours, and flush laterals to oxidize bacterial slime and fungal algal colonies.
4. Government Subsidies: Per Drop More Crop (PDMC)
Under the Pradhan Mantri Krishi Sinchayee Yojana (PMKSY) – Per Drop More Crop component: * Small & Marginal Farmers (< 2 Hectares): Receive 55% central assistance. With state government top-ups (in states like Maharashtra, Gujarat, Tamil Nadu, Andhra Pradesh), the effective total subsidy reaches 70% to 80%. * Other Farmers (> 2 Hectares): Receive 45% financial assistance. * How to Apply: Apply through your state agricultural portal (e.g., MahaDBT in Maharashtra, Horticulture Department portals in Karnataka/UP) by uploading 7/12 land records, water source certificate, and bank passbook.
Frequently Asked Questions (FAQ)
Q1: Can standard urea and DAP be dissolved and injected through a Venturi injector? Granular Urea can be dissolved and injected easily. However, never use standard fertilizer-grade DAP (18:46:0) in drip systems because it contains 15% insoluble gypsum and clay coatings that permanently choke filters and laterals. Always use 100% water-soluble 12:61:0 (Mono Ammonium Phosphate) or phosphoric acid.
Q2: What is the lifespan of 16 mm drip lateral pipes? Virgin, UV-stabilized virgin LLDPE lateral pipes manufactured to BIS standards (IS 12786) have a field lifespan of 6 to 8 years when buried 2 inches below organic mulch or soil and flushed regularly.
Calculate Exact Fertilizer & Input Costs
Use our free agronomy calculators to estimate acreage seed rates, N-P-K dosages, and season profit projections.
Written by KhetiSetu Irrigation Engineering Division
Empowering Indian farmers with scientific agronomy, ICAR guidelines, and transparent digital tools.
